Classic Running Martingale featuring Quality English Leather with stainless steel fittings.

 

This is a very popular rider aid, used to help prevent the horse from raising its head too high.

It consists of a neck strap and a body strap; which is attached to the girth and passes between the horses front legs before dividing into two pieces. At the end of each of these straps is a small metal ring through which the reins pass. When the horse carries its head in the correct position no pressure is felt. However, should the horse raise its head the martingale will restrict the movement of the reins, which in turn causes the bit to bear down on the bars of the horses mouth. The Martingale should be fitted so that the rings are in line with the withers to prevent it putting any pressure on the reins when the horses head is held in the correct position.

Should be used with rubber rein stops, which are located on the rein between the bit & the Martingale ring.

It is available in two weights.

 

Standard Width (consisting of a 1/2"/13mm neck strap and a second body strap, 1"/25mm wide)

Sizes: Shetland, Pony, Cob, Full 

 

Hunt Width (consisting of a 5/8"/16mm neck strap and a second body strap, 11/4"/32mm wide)

Sizes: Full , Extra Full  

 

Available in Black or Brown Leather 

 

 

 

 

     

 

 

Classic Running Martingale

PriceFrom £49.95
Colour
  • Leather should been cleaned and conditioned regularly to keep it supple and to prolong its life. Here are some useful tips on how to maintain your bridlework:-

    i) Always apply leather conditioner several times before using new tack, this will soften and protect the leather before use.

    ii) Remove sweat and grime everytime the bridlework is used, using a slightly damp sponge or cloth.

    iii) Re-apply leather conditioner as necessary, climate and use effect this, like watering a plant too much is as bad as too little!

    iv) Depending how often you ride, you will need to dismantle your bridle completely for a thorough cleaning periodically. This will involve using leather cleaner (not saddle soap) and the re-application of conditioner.

    v) Check the stitching and billets regularly, paying particular attention to where the bit is attached to the bridle at the reins and the cheek pieces, any wear should be repaired, or replaced by a reputable saddler immediately.